Increase font size Decrease font size
 

Paul Clean

Paul Clean also offers 50-packs of pre-treated patches for barrel cleaning, sealed one-by-one in plastic
Paul Clean also offers 50-packs of pre-treated patches for barrel cleaning, sealed one-by-one in plastic

Yet, users that might not want to “waste time” in the hassle of wetting their dry Rollpatches with the Copper or Lead Remover might prefer to go for the ONE patches: pre-wetted Rollpatch-type cleaning patches sold in 50-pieces aluminum tin cans, packed one-by-one in sealed, airtight plastic to prevent the cleaning moisture to loose effectiveness during the shelf life. Each ONE patch is pre-treated with an universal cleaning solution that will prove extremely effective in remove copper, lead, carbon and any other kind of fouling, even when deeply stuck or crusted in the barrel rifling. Unlike the Rollpatches, the pre-treated, wetted ONE patches exist in two variants: the “Small” patches are specific for use with the whole line of Paul Cleanʼs rifled barrel Jags, for any caliber ranging from .22 to .50; the “Shotgun” patches are instead specifically made to be used with the shotgun Jag and the proper adapter on smooth-bore barrels.

These oiled patches, to be used after cleaning in both smooth and rifled barrels, will lubricate and protect the bore
These oiled patches, to be used after cleaning in both smooth and rifled barrels, will lubricate and protect the bore

A variant of the pre-treated, wetted ONE patches, the OIL patches also come in 50-pieces tin cans, packed one-by-one in airtight plastic to avoid any skin contact and degradation of the wetting compound. The OIL patches are soaked with both an universal cleaning fluid and lubricant oil, so to provide at the same time removal of fouling and protective treatment to any type of barrel. As with the ONE patches, the OIL patches come in “Small” version for rifled barrels and “Shotgun” version for smooth bores.

Paul Cleanʼs solution for airguns maintenance is a special patch with a dedicated lead Jag that will allow muzzle-to-breach cleaning
Paul Cleanʼs solution for airguns maintenance is a special patch with a dedicated lead Jag that will allow muzzle-to-breach cleaning

Last, but not least, the Paul Clean line also features a solution for treatment and maintenance of low-power and high-power airguns, so popular at any level from recreational shooters to olympic competitors. The AIR Hook is is the only asystem on the market today that allows safe and proper breech-to-muzzle cleaning of airgun barrels, by the use of Paul Cleanʼs Carbon Fiber Rod and a specific Jag. The use of the AIR Hook system will allow the shooter to clean his/her airgun while maintaining the muzzle protected from any damage or otherwise negative side effect, ensures maximum results and preserving the accuracy of the gun.

                                                                                                      
Rate this item!Paul Clean 5.0 (2 ratings)
print

This website uses cookies to enable us to offer you the best possible user experience.

Accept